Golding’s modern fable “Lord of the Flies” Essay

What gave Golding the inspiration to write the great novel, Lord of the Flies? He wrote the ‘Lord of the flies’ novel soon after the war, which was later published in 1954. So it was soon after the war when he wrote it. So was this where his inspiration came from for the novel. Did seeing children suffering give him ideas? Did the Hitler give him inspiration for jack and Churchill for Ralph? Did the war lead him to write the book at all? We don’t know now, and probably never will do! But we can guess. We can try and work out what made him write this incredible tale of the children gone savages who fight for survival on the island. The children where being evacuated from the war when they crashed. Ralph was the first character to be introduced. He came out the story to be the strong one. The leader who only wanted the best to come of things and to end it all and get home, just like Winston Churchill wanted to win the war. Jack on the other side, turned out to be more evil, more sadistic and much more savage then Ralph. He was being compared to Hitler or Mussolini. The main evil powers in the Second World War. The conch represents the democracy in the play. It could well be related to the democracy between countries, the vote, the councils and the League of Nations. Golding could well of thought of a symbol that was needed to represent this on the island. The only thing stopping them from tearing each other imp from limp. Just like the rest of the world in the war. The conch was there for peace on the island, and the councils were there to stop the world from destroying one another completely. The fire could well represent a piece of the war of mass destruction. The blitz, for example. It destroyed half of London, like the fire destroyed half the island. Londoner’s were getting scared the war would never end, after something so bad happened. Golding incorporated this by using it like the boys on the island, seeing this destruction made them realise, this may never end, and they may all die soon. Once they had been there a little while. They began to turn into savages. Ralph knew this wasn’t going to end soon. They knew things were going to happen, friends and enemies would be made and it would be along time till it ends. This was the case of the war. Hitler and Churchill knew it was a long-term war and they could be there for years. Golding probably noticed during the war, that people tried to be brave. But beneath the skin, they are truly scared. The people who went off to war, had to be brave, to show those they are confident, that they want to win, to set an example for the people at home and the children. Golding sees this, and puts this into his characters. Everyone on the island was scared, Especially the littluns. Ralph and Jack have to be strong. They are scared, but need to put on a brave face for the sake of everyone. People will breakdown without stronger people to support them like Ralph and jack and the bigguns. Golding has again, related his characters to the human beings that took part in the war. He has compared them, and they basically have the same feelings, just shown in different ways and surroundings. Golding also relates the ending to the war. How d-day is the same as the last bit of the Book. However, Ralph was now related to Hitler and Jack, Churchill. This is because, Jack is winning, and he almost has Ralph, almost has him stuck and almost has the end of Ralph. He has him cornered, when it ends. Just before Ralph is about to be killed it all over. The ordeal they have gone through has ended in 5 minutes. Just like, the last day of the war, When Germany is close to loosing, they surrender, and it’s all over. I think the early 20th century was a good source for Golding’s book, ‘Lord of the Flies’. The war was the main thing to happen in the years of Golding writing the book. He saw things first hand and wrote down this in a story, which he changed to make a story, but used the same roots as the war stories. Golding book was a fabulous story of boys, who are stranded, but he hides the fact hat it’s related to the war well. You don’t really notice it, but looking beneath the skin of the book, you actually realise the strong resemblance it has with the war.

How effectively did the Soviet Union control Eastern Europe from 1945 to 1968?

In 1945, it was very important that Stalin gained control over his sphere of influence; WW2 had come to an end, and the future of the Soviet Union was at an unstable point. From 1945-8 Stalin used a series of ‘salami' tactics to gain control over the Eastern European countries. This would involve setting up communist parties within a country, winning a coalition government, and ultimately, taking over to run a full communist regime. This was effective in the sense that Stalin, in the space of three years, was able to takeover seven different countries. However, out of these, only one country – Albania – allowed the takeover without any opposition, the other countries gave more of a struggle. There was obviously some backlash against Stalin's actions, as they did not run smoothly, and this is why he probably had to use more severe tactics when trying to take control over Eastern Europe. In Bulgaria (1945), Stalin had all opposing party members executed, and was only then able to take full control. After this, Stalin had no problems gaining power over such countries – without further opposition, as the same techniques were used in Poland and Czechoslovakia two to three years later. This shows that Stalin did not want to give way to chance, seeing what would happen in each country gradually, by using the minimum force needed. He wanted to be sure of total control, and therefore used the necessary tactics to succeed – it appears that the most extreme were the most effective. Stalin was able to keep such a tight ‘following' due to the fear and propaganda that followed his infamous Red army. He had placed them within his sphere as a warning to the people. If they opposed, they would be dealt with by the Red Army through means of ‘re-education'. They kept an eye over the people, and crushed any sort of uprising. This would have been a deterrent enough for anybody looking to rebel against communism. This proved to be effective as there are no real incidences where the Red army have been called in to sort out a situation (apart from in Hungary and Czechoslovakia, but that was under different circumstances). When Stalin saw the lure of the Marshall Plan, he definitely felt under pressure to counteract this – coming up with Comecon 1949. This shows he was desperate, as firstly, this goes against communist views, as the idea was to send money to communist countries to aid them in their economic process. This was a bribe, nonetheless; but it worked. No countries already within the control of the Soviet Union left the sphere – if they were tempted by money, they could still have it, and Stalin would still have control. They only probably stayed with Stalin out of the fear of the consequences, and therefore this tactic was successful due to previous attempts of control, mainly because of the Red Army. Stalin finally dies in 1953, and Khrushchev takes over. He introduces a new relaxed policy, and looks to ‘de-Stalinise' Eastern Europe, hoping to promote better relations with the West. Subsequently, other countries within the sphere wanted a more liberal government, and started to rebel. This shows that Stalin himself, along with his attitude and thinking, was an effective way to keep control over Eastern Europe. he was not a liberal man, he insinuated fear and death throughout the people, who dared not oppose. Now that there is a more liberal leader in office, the people feel this is the opportunity they need to express their feelings. What Khrushchev may have done wrong, was to initiate an ‘instant' change, which could not be done on a large scale in regards to the whole of Eastern Europe at one given time. Stalin was effective in what he did, as he used gradual changes to implant his policy. 1953 also saw riots in Czechoslovakia, where people where burning Soviet flags and demolishing Stalin statues – this was an obvious attack on Soviet power. However, the riots were quickly put down by the Red army, but the consequences were not great ones, and therefore encouraged strikes in East Germany to occur. East Germans aired their grievances about wage cuts, but the Red army was called in to crush all uprising. 400 people were killed; Khrushchev was reverting back to Stalin's old methods, however people were not put off, as there are further problems in Hungary in 1956. Does this mean that the Red Army were no longer feared, or was there a change in attitude from the people? A level of both, most likely, but why? This leads back to Stalin and fear that he as an individual imposed on the countries. Khrushchev did not have that same effect, and from then on, people were more open to oppose him, knowing they could probably get away with a lot more. There was also a problem with East Germany, and how the collapse of it could have been crucial, in terms of ‘winning' the Cold War. Germany had been one of many significant factors in the Cold War, and a collapse in Germany would mean a collapse in Soviet power if the West were to reclaim it. This might have been a short term cause for the Warsaw Pact in 1955 – the Soviet's version of NATO – this not only gained support against the West, but also helped to unite a dividing sphere. This does not prove to be of any worth (at this time) as in the following year, Hungary has a revolution. There main aim was to get rid of Rakosi – a mini Stalin – through mass demonstrations, which later turned into street fighting. Oddly, Khrushchev introduces Nagy as the new leader of Hungary, instead of sending in the Red army. Was it now that he realised that the Red army did not have so much of an effect that it used to? This is the first time compromising had been used, but quickly backfired. Riots continued, and Nagy had declared Hungary would be leaving the Warsaw Pact. The S.U. was looking at losing control over one country, and sure enough, others would follow. The Soviets again, reverted back to trusted methods, calling in the Red Army to crush all uprising – killing Nagy in the process. The exact same happened with Czechoslovakia in 1968. It now seems that from 1945-68, there were times when the Soviet had complete control over Eastern Europe, and others, quite the opposite. Stalin had realised that in order to have control, he would have to use extreme tactics – the fear of the Red Army, propaganda etc. He also knew that with complete control, there was no edge way for choice or compromise with the people. This is where Khrushchev went wrong, expecting to have complete control when he gave individual countries more power. Knowing of such a relaxed attitude, the people then took advantage of this, and were no longer scared of the repercussions, as there is uprising after uprising under Khrushchev's rule. By the mid-50's effective control is on its way to becoming highly non-existent.

Brain Computer Interface

Modifying the human body or enhancing our cognitive abilities using technology has been a long-time dream for many people. An increasing amount of research tries to link the human brain with machines allowing humans to control their environment through their thoughts. Research on BCIs began in the 1970s, but it wasnt until the mid-1990s that the first working experimental implants in humans appeared. Following years of animal experimentation, early working implants in humans now exist, designed to restore damaged hearing, sight and movement. The common thread throughout the research is the remarkable cortical plasticity of the brain, which often adapts to BCIs, treating prostheses controlled by implants as natural limbs. With recent advances in technology and knowledge, pioneering researchers could now conceivably attempt to produce BCIs that augment human functions rather than simply restoring them, previously only the realm of science fiction. 2. Brain Machine Interface (Brain Computer Interface): In this definition, the word â€Å"brain† means the brain or nervous system of an organic life form rather than the mind. Computer† means any processing or computational device, from simple circuits to silicon chips (including hypothetical future technologies such as quantum computing). A Brain Machine Interface (BMI), sometimes called a Direct Neural Interface or a Brain Computer Interface, is a direct communication pathway between a human or animal brain (or brain cell culture) and an external device. In one-way BCIs, computers either accept commands from the brain or send signals to it (for example, to restore vision) but not both. Two-way BCIs would allow brains and external devices to exchange information in both directions but have yet to be successfully implanted in animals or human. Brain-computer interface (BCI) is collaboration between a brain and a device that enables signals from the brain to direct some external activity, such as control of a cursor or a prosthetic limb. The interface enables a direct communications pathway between the brain and the object to be controlled. In the case of cursor control, for example, the signal is transmitted directly from the brain to the mechanism directing the cursor, rather than taking the normal route through the bodys neuromuscular system from the brain to the finger on a mouse. By reading signals from an array of neurons and using computer chips and programs to translate the signals into action, BCI can enable a person suffering from paralysis to write a book or control a motorized wheelchair or prosthetic limb through thought alone. Current brain-interface devices require deliberate conscious thought; some future applications, such as prosthetic control, are likely to work effortlessly. One of the biggest challenges in developing BCI technology has been the development of electrode devices and/or surgical methods that are minimally invasive. In the traditional BCI model, the brain accepts an implanted mechanical device and controls the device as a natural part of its representation of the body. Much current research is focused on the potential on non-invasive BCI. At the European Research and Innovation Exhibition in Paris in June 2006, American scientist Peter Brunner composed a message simply by concentrating on a display. Brunner wore a close-fitting (but completely external) cap fitted with a number of electrodes as shown in fig. Electroencephalographic (EEG) activity from Brunners brain was picked up by the caps electrodes and the information used, along with software, to identify specific letters or characters for the message. The BCI Brunner demonstrated is based on a method called the Wadsworth system. Like other EEG-based BCI technologies, the Wadsworth system uses adaptive algorithms and Pattern-matching techniques to facilitate communication. Both user and software are expected to adapt and learn, making the process more efficient with practice. During the presentation, a message was displayed from an American neurobiologist who uses the system to continue working, despite suffering from amyotrophic lateral sclerosis (Lou Gehrigs disease). He was able to send the following e-mail message: I am a neuroscientist who (sic) couldnt work without BCI. I am writing this with my EEG courtesy of the Wadsworth Center Brain-Computer Interface Research Program. EEG Pattern Recognition This project aims to improve performance of NASA missions by developing brain-computer interface (BCI) technologies for augmented human-system interaction. BCI technologies will add completely new modes of interaction, which operate in parallel with keyboards, speech, or other manual controls, thereby increasing the bandwidth of human-system interaction. The research will extend recent feasibility demonstrations of electromyographic (EMG) methods for neurocontrol to the domain of electroencephalographic (EEG) methods of neurocontrol. These methods will bypass muscle activity and draw control signals directly from the human brain. BCI technologies will provide powerful and intuitive modes of interaction with 2-D and 3-D data, particularly for visualization and searching in complex data structures, such as geographical maps, satellite images, and terrain databases. . Model train control via brain interface machine: Hitachi has successfully tested a brain-machine interface that allows users to turn power switches on and off with their mind. Relying on optical topography, a neuroimaging technique that uses near-infrared light to map blood concentration in the brain, the system can recognize the changes in brain blood flow associated with mental activity and translate those changes into voltage signals for controlling external devices. In the experiments, test subjects were able to activate the power switch of a model train by performing mental arithmetic and reciting items from memory. The prototype brain-machine interface allows only simple control of switches, but with a better understanding of the subtle variations in blood concentrations associated with various brain activities, the signals can be refined and used to control more complex mechanical operations. In the long term, brain-machine interface technology may help paralyzed patients become independent by empowering them to carry out actions with their minds. In the short term, Hitachi sees potential applications for this brain-machine interface in the field of cognitive rehabilitation, where it can be used as an entertaining tool for demonstrating a patient’s progress. NOTE: The earliest interfaces developed in this breakthrough field of research require scientists to insert electrodes into the skull in order to physically tap directly into the brain, and researchers are currently trying to develop technologies that will enable them to access neurological activity through minimally invasive techniques. It is hoped that some day brain machine interfaces will be able to read neural signals non-invasively, from outside the skull, and that devices will be operated involuntarily, without deliberate conscious thought. Thus, for example, fighter pilots wearing specialized helmets may be able to operate some controls automatically, just by thinking. 4. Neuroprosthetics: Neuroprosthetics (also called Neural Prosthetics) is a discipline related to neuroscience and biomedical engineering concerned with developing neural prostheses, artificial devices to replace or improve the function of an impaired nervous system. The neuroprosthetic seeing the most widespread use is the cochlear implant, with approximately 100,000 in use worldwide as of 2006. There are several types of neuroprosthetic as follows: I. Sensory Prosthetics: i. Visual prosthetics: One of the prominent goals in neuroprosthetics is a visual supplement, noting roughly 95% of all people considered blind suffer significant impairment but have some capability (for example, seeing some sort of blur) only about 5% of blind people are totally blind. By the 1940s, researchers had established the concept of artificial electrical stimulation of the visual cortex, and in the late 1960s, British scientist Giles Brindley produced breakthrough findings with a system for placing electrodes on the brains surface. When specific areas of the brain were stimulated in blind volunteers, all reported seeing phosphenes that corresponded to where they would have appeared in space. However, experiments were discontinued because of the uncomfortably high currents required for stimulation on the surface of the brain. Encouraged by this work, the National Institutes of Health undertook a project to develop and deploy an interface based on ultra fine wire (25 to 50 micrometers) densely populated with electrode sites that could be implanted deep into the visual cortex, thus requiring less current than Brindleys original design. This work led to new electrode technology—finer than the width of human hair—that could be safely implanted in animals to electrically stimulate, and passively record, electrical activity in the brain. The efforts produced significant advances in neurophysiology, with publication of hundreds of papers in which researchers attempted to develop an electronic interface to the brain. ii. Auditory prosthetics (cochlear implant): A cochlear implant (or bionic ear) is a surgically implanted device that can help provide a sense of sound to a person who is profoundly deaf or severely hard of hearing. Unlike hearing aids, the cochlear implant does not amplify sound, but works by directly stimulating any functioning auditory nerves inside the cochlea with electrical impulses. External components of the cochlear implant include a microphone, speech processor and transmitter. iii. Prosthetics for pain relief (Spinal Cord Stimulator): The Spinal Cord Stimulator or (Dorsal Column Stimulator) is used to treat chronic neurological pain. It is implanted near the dorsal surface of the spinal cord and an electric impulse generated by the device provides a tingling sensation that alters the perception of pain by the patient. A pulse generator or RF receiver is implanted in the abdomen or buttocks. A wire harness connects the lead to the pulse generator. II. Motor prosthetics: . Bladder control implants (Sacral anterior root stimulator): Where a spinal cord lesion leads to paraplegia, patients have difficulty emptying their bladders and this can cause infection. From 1969 onwards Brindley developed the sacral anterior root stimulator, with successful human trials from the early 1980s onwards. This device is implanted over the sacral anterior root ganglia of the spin al cord; controlled by an external transmitter, it delivers intermittent stimulation which improves bladder emptying. It also assists in defecation and enables male patients to have a sustained full erection. The related procedure of sacral nerve stimulation is for the control of incontinence in able-bodied patients. ii. Sensory/Motor prosthetics: In 2002 an implant was interfaced directly into the median nerve fibres of the scientist Kevin Warwick. The electrode array inserted contained 100 electrodes, of which 25 could be accessed at any one time. The signals produced were detailed enough that a robot arm developed by Warwicks colleague, Peter Kyberd, was able to mimic the actions of Warwicks own arm and provide a form of touch feedback via the implant. Fig: Electrode array Fig: Robot arm iii. Cognitive prosthetics: Sensory and motor prostheses deliver input to and output from the nervous system respectively. Theodore Berger at the University of Southern California defines a third class of prostheses aimed at restoring cognitive function by replacing circuits within the brain damaged by stroke, trauma or disease. Work has begun on a proof-of-concept device a hippocampal prosthesis which can mimic the function of a region of the hippocampus a part of the brain responsible for the formation of memories. . BMI versus Neuroprosthetics: Neuroprosthetics is an area of neuroscience concerned with neural prostheses — using artificial devices to replace the function of impaired nervous systems or sensory organs. The most widely used neuroprosthetic device is the cochlear implant, which was implanted in approximately 100,000 people worldwide as of 2006. [2] There are also several neuroprosthetic devices that aim to restore vision, in cluding retinal implants, although this article only discusses implants directly into the brain. The differences between BCIs and neuroprosthetics are mostly in the ways the terms are used: neuroprosthetics typically connect the nervous system, to a device, whereas the term â€Å"BCIs† usually connects the brain (or nervous system) with a computer system. Practical neuroprosthetics can be linked to any part of the nervous system, for example peripheral nerves, while the term BCI usually designates a narrower class of systems which interface with the central nervous system. The terms are sometimes used interchangeably and for good reason. Neuroprosthetics and BCI seek to achieve the same aims, such as restoring sight, hearing, movement, ability to communicate, and even cognitive function. Both use similar experimental methods and surgical techniques. 6. Future Trends and Scopes: Recent advances in cortically controlled brain-machine interfaces (BMIs) have demonstrated that goal-directed movement of external devices is possible in real-time using multi-electrode recordings from cortex. A number of challenges are currently being confronted to further advance BMI research to the next level. These include choosing the optimal decoding algorithm for the type of control to be performed, localizing the optimal cortical site for reliable control, and focusing on the most suitable electrophysiological signal for practical use in a BMI. We present results that attempt to address these challenges based on multi-electrode recording from multiple motor cortical areas in behaving monkeys. . Conclusion: Although brain–machine interfaces are often talked about in relation to disabled people, we can expect they will also be used by the non-disabled as a means to control their environment especially if the devices are non-invasive and no implants are needed. To date there has not been much public discussion of the implications of brain machine interfaces, the amount of public RD funding they receive, and control, distribution and access to these devices.

Barriers to Effective Communication in the Workplace Essay

Barriers to Effective Communication in the Workplace - Essay Example Communication in this context includes friendly and supportive staff, supportive and effective management, job satisfaction, and staff development including oppurtunities for new challenges (McCabe, 2005). In the healthcare facility of our concern, it was widely felt among the junior enlisted staff and the officers that they were not provided with sufficient advise as to what it takes to be competetive and acheive promotions in order to improve career advancement. The efforts of the senior management to assess officer demographics to determine the number and type of specialities was deemed insufficient. Wallis and Wolff (1988) had documented that the workload of the staff in public hospitals is not well differentiated and the various tasks such as rotation is not flexible. Private hospitals as well as speciality hospitals impart technical training to their staff helping them in their career enhancement. Also, the present generation of healthcare workers report opportunities for skill building and learning as key motivators in deciding to stay or leave an organization, reflecting their perceived commitment to continuing development and learning. Investment in mentoring programs and training and development programs can be an efective response to these needs (Curran, 2003). Much of the issues related to healthcare communication are related to the nature of micromanagement exercised in these institutions. For the success of any institution, the staff must be treated as unique individuals who can make unique contributions (McCabe, 2005). A decentralized decision making and shared governance system can make a huge difference in the way staff incorporate themselves into the organization. Autonomy to make decisions is necessary for job satisfaction (Upneiks, 2003). The senior management must make it their priority to provide a "climate free of miromanagement with equal and fair treatment for all" - implying an absence of favoritism as well as linguistic discrimination.

Importance of technology in business (Radio frequency identification Assignment

Importance of technology in business (Radio frequency identification (RFID) - Assignment Example Due to its potential advantages such as no requirement of line of sight scanning (direct contact), RFID is increasingly being used by many organizations as an alternative to the bar code technology. RFID methods employ radio waves to automatically recognize and capture data pertaining to objects. An RFID system constitutes three parts: an RFID tag, an antenna and an RFID reader. RFID tags constitute an integrated circuit plus the antennae, charged with the duty to transmit data to a RFID reader (Li, Rida & Tentzeris, 2009). The reader then transforms the radio waves to a data form that is more useful. Closely following is the use of a given communications interface to transmit data the information gathered from the tags to the host computer system. The gathered data resides in a database system associated with this computer system whilst awaiting analysis. RFID was mainly intended to address the inefficiency that was associated with the barcode reader. Basically, the optical nature of the bar code has often required that the lasers see the labels associated with objects. The line of sight between the label on an object and the reader has often between impractical, difficult and at times impossible to attain in the industrial context (Tyler, 2007). Proper functioning of the bar code reader has always required that the object label and the reader are placed in positions that are relative to each other in addition to clean labels that are deprived of abrasion. Uckelmann (2012) asserts that clerks charged with store check outs have often had difficulty in making sure that a bar code reader is able to read the bar code associated with a given product. RFID device provides a tracking approach where the position of the product to be tracked does not have to be relative to that of the scanner. Using RFID, a client inside a supermarket could p lace his items in a basket then set the entire bag on the scanner. The scanner

Analysis of Articles about Gender Studies Essay Example | Topics and Well Written Essays - 500 words

Analysis of Articles about Gender Studies - Essay Example She told them she always thought she had three. And that showed the extended family that the author seems to enjoy. For every person who is a part of the extended family, the author and her growth were more important than anything else. This made everything else immaterial. As the author points out, the pre-conceiving arrangement that the mothers went through ensured that the differences in their thought processes will not occur. There was enough leeway created between all of them and freedom to change their decisions. So much so that no one altered any of the decisions that were made. This made the entire process of bringing up the kid more interesting to the extended family. She was no ordinary child and whatever happened to every one of them was not an ordinary event. The author finally, justifies that the ideas and the opinions taken should be done so in the right spirit and this would ensure that the biotechnological advances made are used in the right spirit. There was nothing wrong or unnatural in the entire process. She does not feel in any way different from the others and neither did anyone else feel that way though many thought she was special. The questions will be: Creation of a human being either by cloning or by IVF methods is out of nature. Will this not give rise to a culture that has the least respect for the natural phenomenon? And will not this lead to a condition where the human race might overpopulate or try to control nature which otherwise could condition the environment in a much better way? While so, how can control and modifying natural occurrences influence the behavior of the human race? All these issues are not really dealt with by the author. When the perspective goes larger those questions come up. Whereas in the case of the author's analysis, she has restricted to her own view and to the views of the people around her.

Analysis of Effectiveness of Two Cushions in the Prevention of Heel Essay

Analysis of Effectiveness of Two Cushions in the Prevention of Heel Pressure Ulcers Study - Essay Example At the beginning of the introduction, the researchers presented the facts as to why conducting a study about heel pressure ulcers was important. It is considered as a common problem in clinical practice and is deemed burdensome on both human and financial terms. The manifestation of heel pressure ulcers affects the patient both physically and mentally, inclusive of the fact that it adds to the expenses in clinical treatment. Thus, the researchers chose to assess two different cushions in terms of effectiveness in preventing heel pressure ulcers (Braden and Blanchard, 2007). The study has also defined what pressure ulcers are, including the means of how it can be prevented. In general, these measures are to reduce the duration or reduce the magnitude of pressure and shearing forces. In that regard, the researchers analyzed that the reduction of the duration of shear and pressure can be carried out through repositioning the patient or through the use of alternating pressure air mattres ses (Heyneman, et. al, 2009). Since both variables can be reduced through the utilization of a tool that would increase the contact surface of the patient with the underlying support surface. The researchers then elaborated on the products with varying pressure reducing capacity in terms of effectiveness. ... This can be done through putting a pillow under the patient's legs so that the heels would be suspended above the mattress. This method is deemed viable as the heel zone would not be subjected to any pressure, and the pressure is distributed accordingly in the lower leg, as supported by the pillow. The study cited five studies they have acquired in PubMed in reference to the pressure reducing qualities of pillows, as well as each of the product's effectiveness in terms of removing heel pressure ulcers. The studies included were from Smith (1984), De Keyser et al. (1994), Tymec et al. (1997), Cheney (1993) and Collins et al. (2002).     Ã‚  

Source Evaluation Essay Example | Topics and Well Written Essays - 1000 words

Source Evaluation - Essay Example Consequently, the number of available papers intended for this topic has made finding suitable sources a very difficult and tedious process. Some titles with good information may be those published a few decades ago, while there are also some recently released papers posted on the internet which pose doubts in terms of integrity and sincerity. Indeed after meticulously reviewing the available list of sources, five academic titles have been chosen to serve as references for the upcoming research paper namely Recycling and Waste Diversion Effectiveness: Evidence from Canada by Ida Ferrara  and  Paul Missios, Managing Electronic Waste: Issues with Exporting E-Waste by Linda Luther, Recycling and Waste-to-Energy: The Ongoing Compatibility Success Story by Jonathan V. L. Kiser, Greening Household Behaviour:  The Role of Public Policy and Improving Recycling Markets both by Organisation for Economic Co-operation and Development (OECD). Recycling and Waste Diversion Effectiveness: Evi dence from Canada is a paper written by Ida Ferrara  and  Paul Missios that was published in the 2005 issue of Environmental and Resource Economics, a peer-reviewed academic journal about environmental economics and one that acts as the official journal of the European Association of Environmental and Resource Economists since 1991 (Environmental Economics). The paper explores the relationship between recycling policy options and recycling behaviors that will identify the effective means of averting post-consumer waste. Also, it focuses on the significant effects of mandatory recycling for almost all types of provisions, which is similar to the core of my research paper. Its authors Dr. Ida Ferrara and Dr. Paul Missios both completed their Ph.D at York University. Ferrara is currently the Associate Professor of Economics at the Faculty of Liberal Arts and Professional Studies in the same school (York University) while Missios is the Chair of the Department of Economics and Assoc iate Professor at Ryerson University in Canada (Energy Innovation Corp.). They both received several merit and research awards and numerous study grants over the years and have written several articles for peer-reviewed publications, journals, books and technical papers specifically in the Canadian territories. Managing Electronic Waste: Issues with Exporting E-waste is a book written by Linda Luther, an analyst in Environmental Policy at the Congressional Research Service in the United States who took her Masters degree in John Hopkins University (Profile). It was published in 2010 by DIANE Publishing which distributes important documents and reports from the U.S. government. They also publish journals of prestigious associations such as the American Philosophical Society, the Historical Society of Pennsylvania and The Library Company of Philadelphia (Diane Publishing). The featured book focuses on the hazards of e-wastes and its relevant recycling procedures. This will set the int roduction of my research paper by presenting the impact of garbage to the society and the factors influencing recycling. Recycling and Waste-to-Energy: The Ongoing Compatibility Success Story by Jonathan V.L. Kiser is an article featured in the online copy of MSW Management:  The Journal for Municipal Solid Waste Professionals in its May-June 2003 series. The paper demonstrates how recycling and waste-to-energy management finally work together after ten years of tedious investigation. This will address my research paper’s claims that recycling is an efficient waste management process that will benefit everyone. Kiser did his MBA in Business

Accounting Essay Example | Topics and Well Written Essays - 1250 words - 6

Accounting - Essay Example However, a name change could potentially alert customers and suppliers to new ownership and increased vitality and momentum at the company. In particular, the well-known name (Pinessi) has its own marketing benefits. But are these benefits really worth change the name? This seems unlikely thus great benefits will still be realised by retaining MCS Mining Supplies name and launching a new but limited marketing campaign alerting the industry to the new joint venture between well-known players in domestic mining. MCS Mining Supplies leads the mining supplies industry in Australia. We produce drill products that suit a wide range of customers, from high volume, low cost orders to unique, custom drill apparatus. MCS is staffed by highly skilled designers, machinists and technicians who produce drill custom pieces order, ahead of deadline and bulk orders with consistency and reliability. We maintain manufacturing plants at two sites in Western Australia, Perth and Kalgoorlie, and in Mount Macarthur in Queensland. MCS supplies 40% of the domestic market while we are expanding into the rapidly developing East Asian market, building our brand which is recognized for quality, capacity and reliability. We aim to grow our construction industry market share both at home and abroad. Both our Korean chapter and new projects in China serve the Chinese market, which is the largest in the world. We are also expanding our product line and developing related products specifically for the oil industry. At MCS we pride ourselves on maintaining our core vision of service and stability while quickly leveraging new technologies and opportunities. China’s phenomenal economic growth has been among the worlds’ biggest success stories since the reforms of Deng Xiou Ping in the 1980’s. Just a few years earlier, China was in the throes of Mao’s cultural revolution, which decimated entire industries, halted

Technology in Our Life Essay Example for Free

Technology in Our Life Essay Way too dependent on technology Most kids these days dont even know how to use a dictionary because Google has it all so they dont see it as a necessary skill. Look around at how many people are engrossed in their phones walking down the street, or while driving. Most accidents are caused by people using their phones while driving, whether it be for GPS, to get on Facebook or anything else. Its insane for some people to fathom how anyone ever lived without texting, GPS, and Google. Technology is a big help and a big problem. So how do we know when too much is too much when it comes to using all the technology we have today?

A Valediction Forbidding Mourning English Literature Essay

A Valediction Forbidding Mourning English Literature Essay John Donnes poem A Valediction: Forbidding Mourning uses many metaphors and allusions to show the love between the author and his significant other. Although the narrator is leaving, he believes their love is strong enough to withstand the separation. He then begins to compare their love to various symbolic things. In John Donnes A Valediction: Forbidding Mourning, his many metaphors and allusions show the power of love and how strong it actually is. In the beginning of Donnes poem, the speaker is explaining that he is soon going to be separated from his lover. Before he leaves, he tells her his leaving should not be a time for mourning and sadness. He then tries to make things better by comparing their love to various things such as a noble mans death, a drawing compass, and the planets. He implies that death should not be feared but be accepted with little sadness. The narrator wants his love to wait for him until his return, and he states their love is too strong not to endure the separation. He explains that their love goes beyond physical love, and that they have a spiritual love that goes beyond the material world and what their bodies can endure. He believes although he is leaving, their souls are still one, and the couple will now experience expansion. Expansion can be defined as the act of increasing in size or volume. The narrator compares this to the way gold can be stretched by beating. He believes the one soul they have will stretch, and it will take the place of the distance between the two. The narrator also uses another example such as the compass. A compass shows a fixed point and one that moves in relation to the north pole. The compass is used to show that when the two are separated his love is the fixed foot on the compass, and he is the foot that moves. The narrator then says, Thy firmness makes my circle just, and makes me end, where I began. He compares his soul and the soul of his love to a twin-compass. Compasses assist sailors in navigating the ocean, and metaphorically they help the two lovers remain linked no matter what the distance. On the compass, no matter how many times the moving foot goes around the circle, the two legs are eventually joined again. The first four lines of the poem suggest that ones soul is only part of the body until death when it goes. The author using the word whisper, indicates that the soul and the body can communicate with each other. One of the most important parts of the poem is the separation of the body and soul. The narrator believes that even death cannot separate his lover and himself because they share the same soul. This needs to be accepted for Donnes point to be proven and by the line Whilst some of their sad friends do say. The breath goes now, and some say, No. This shows that not all friends agree with the narrators point of view. The metaphor of an earthquake in line nine and the celestial spheres in line eleven contribute to the understanding of his loving relationship. Donne uses the lines Moving of thi Earth and trepidation of the spheres to explain how two different huge events can bring harm and fear or innocence. He uses these two events to show the contrast between two bodies and two souls of those who are in love. Donne concludes with two souls cannot be separated like two bodies can. Therefore, if the two lovers bodies are separated by great distance they will be like the compass mentioned earlier in the poem. The points on the compass are wide, but the handle always joins the two together. Throughout the poem Donne argues that although the couple is physically separated they are connected by the soul. Therefore, the distance between the two lovers is insignificant. Although they are spread apart they are not broken. The two still share a strong connection. John Donne uses the whole poem to make his point. He first says that when one passes, the soul separated from the body. He then asserts that two souls mix when two people are in love. They become one, and even death cannot break this bond. He uses the compass to demonstrate this point. By making these points, the narrator is showing his love not to be upset about his leaving. He states he is the moving foot on the compass and has no choice but to leave. However, the compass always makes a circle and he will always find a way back to his love. Even though the separation is temporary, it is very emotional and Donne feels the pain of the separation.